Inertial Measurement Unit
PI-08
PI-08 is our smallest, enclosed IMU that has an array of MEMS sensors. It is environmentally protected (IP-65) and has several standard external interfaces with wide input range power supply. We process the multi-array data with our unique, proprietary algorithms and obtain the bias, linearity and noise characteristics similar to much larger and more expensive units on the market. We calibrate all units over the whole specified operating temperature range. This is our best-selling unit that we can manufacture in large volumes.
Full-scale range
Bias (In-Run Stability), (1σ)
Bias (Over Temperature), (1σ)
Angle Random Walk, (1σ)
Rate Noise Density
Scale Factor
Error over temp., (1σ)
Non-Linearity , (1σ)
Bandwidth (-3dB)
Misalignment, (1σ)
g-Sensetivity
Measurement Range
Bias (In Run Stability)(1σ)
Bias (Over Temperature) (1σ)
Noise Density
Scale Factor
Error over temp., (1σ)
Non-linearity
Bandwidth (-3dB)
Temperature range (operating)
Input Power
Power Consumption (12V input)
Interfaces
Size
Weight
Vibration (20Hz - 2000Hz)
Out Data Rate
±2000 deg/sec
5 deg/hr
< 50 deg/hr
0.11 deg/sqrt(hr)
0.0017 deg/sec/sqrt(Hz)
0.03%
< 0.025% of FS
100-250 Hz
< 3 arc min
TBD
±15 g
10 ug
1 mg
30 ug/sqrt(Hz)
0.1%
< 0.01% of FS
100 - 250 Hz
-40C - +85C
4.5 V to 36 V
120 mW
RS232, RS485
46 x 31.8 x 21,5 mm
< 30 gram
6 g RMS
250 - 5000 Hz
ACCELEROMETER ALLAN VARIANCE, 25C
GYROSCOPE ALLAN VARIANCE, 25C
For all IMUs and inertial modules, we offer special boards that allow you to conveniently and correctly mount and connect our units for evaluation purposes. The boards have more common connectors and they are a very simple solution when you need a quick start or your application allows a bit extra volume for the purpose. Please, refer to our Accessories section for more details.